The lower end of vent pipe is located close to the floor. Cement floor with a viewing hole and a cellar. Click Rob Crossland for additional related pages. Garage on the plot, in addition to its direct destination, can serve as a location for the home workshop and cellar. Hear other arguments on the topic with Richard Elman. Thermal insulation brick garage necessarily, if the machine is operated year-round. The width of the observation wells should be 10-15 cm shorter than the distance between car wheels, and the depth of such a person, not bent, it could work. The walls and the floor concreted and secure the edges to the upper corners of the metal, the wheels do not slide off the machine.

The floor in the garage should be a long time withstand mechanical stress, is resistant against oil and gasoline. Preferably on the back of the garage, at the height of the bumper cars to attach a wooden board, rubber - to protect against possible attacks at the entrance to garage. When using the garage to put the car exhaust is recommended to the gate. The device is a garage below ground level is possible if the basements are fully utilized, and the ceiling of the basement room has a fire retardant. Keep the car on the plot can be shed (because the capital to build a garage on the season does not make sense). The height of 2-2.5 meters canopy.

Pent roof. ABI beam bars are based on racks located around the perimeter of the site with a step of 1.5 meters. Racks buried at a depth of 80 cm or I m, compacted and strengthened with concrete. Before installing the rack ends coated with bitumen and wrapped tolyu. Durable rack of metal pipes, mounting studs into them through holes drilled for bolts. If you still want to shed replaced by a weatherproof garage, the racks can be sheathing boards, and upholster the outside sheet metal. Gates also is best done from the boards and upholster metal corners. Board filed 'at an angle of 45 degrees. Gates for garages and similar structures may be: lifting; folding; minimized. Garage gates are equipped with mechanical rods, concrete sills, photocells, magnetic or radio control with electro-pneumatic or.